Functionality

The main features

• Lots of hardware options

  One firmware that support multiple hardware opions. You can select displays, temperature sensors and ADC. Can be configured in the web UI.

• Modern web based interface

  Modern HTML5 based web interface with easy access to configuration and current status.

• 3 step easy scale calibration

  3 easy steps to calibrate your scale all from the web interface. Tare the scale, calculate factor based on known weight and finally verify.

• 3D printable bases for kegs

  3D models for keg bases or uses any of the other load cell bases that can be found.

• Hardware design for up to 2 scales

  Software support one or two scale with attached displays for showing statistics.

• Stable level detection

  Software based detection for finding a stable level of each keg.

• Pour detection

  Can detect when a beer is poured. Needs to be more than 10 cl and there needs to be a stable level of approx 40 seconds after the pour.

• Estimating remaning glasses/pints

  Based on weight and final gravity the remaning volume can be calculated. The weight of the empty keg can be entered so that this is removed from the masurement.

• Integration with Home Assistant

  Data can be sent to home assistant to show current beers, last pour, remaning glasses etc.

• Integration with BrewSpy

  Can fetch data from BrewSpy on what brews are current and update the level when changed.

• Integration with BrewFather

  Can fetch information on last brews for easy import of data.

• Load cell temperature compensation

  Formula can be added to do temperature compensation for each loadcell.

• Easy software updates

  Upload new software via the web UI.

• Temperature & Humidity sensor

  Place a temperature sensor close to the base, this can be used to do temperature adjustments of the load cells using a formula. Supports either a DS18B20, BME280 or a DHT22.

• Backup and Restore of settings

  All the configuration of the device can be exported and stored as a text file (json). This can be used to restore settings in case of hardware problems. You can also create a template of your settings and use that on multiple devices. Just make sure to change the “id” fields to match your device id (can be found on the index page).

• Celsius or Fahrenheit

  You can switch between different temperature formats. KegMon will always use C for it’s internal calculations and convert to F when displayed.

• Kg or Lbs

  You can switch between different weight formats. KegMon will always use kg for it’s internal calculations and convert to Lbs when displayed.

• cl, UK fl. oz or US fl. oz

  You can switch between different volume formats. KegMon will always use cl for it’s internal calculations and convert to other formats when displayed.

• Customize pins and the hardware design

  You can customize the pin configuration if you want to change the hardware setup.