Custom boards¶
Its possible to add custom boards to the build process. These can be built from the source code, I dont take any responsibiity for testing and ensuring those work as intended only that they will build without errors. I dont have the boards to do testing. You are Welcome to submit issues for these targets and I will assign those to the contributor.
board-id |
added in |
contributor |
|---|---|---|
Olimex ESP32-C3-DevKit-Lipo |
2.1.0 |
simonidelh |
Olimex ESP32-C3-DevKit-Lipo¶
This Model is supported by gravitymon. It is tested with the GY-521 only! So the temperature also gets measured by the gyro. To have battery voltage monitoring, solder the bridges ‘PAT_PWR_E1’ and ‘BAT_SENS_E1’ at the bottom side together, to measure the voltage with pin 3. The LiPo/LiIon-battery gets connected to the 2.00 mm pitch connector ontop of the board.
Gyro gets connected to 3,3V, GND and SDA to PIN 1 and SCL to PIN 0 of the olimex board.